 |
Screw diameter |
mm |
28 |
32 |
| Max. Injection pressure |
Mpa (kg/cm²) |
218 (2230) |
167 (1710) |
| Max. Hold pressure |
Mpa (kg/cm²) |
174 (1784) |
134 (1368) |
| Injection capacity |
cm3 |
31 |
84 |
| Screw stroke |
mm |
50 |
| Maximum Injection speed |
mm/s |
300 |
| Screw rotation speed |
rpm |
400 |
| Nozzle contact force |
kN (tf) |
| 5.8 (0.6) |
| Nozzle protrusion from platen |
mm |
43 |
| Nozzle R and orifice |
mm |
20 X 1.8 |
| Injection displacement stroke |
mm |
190 |
| Heater capacity |
kw |
4.8 |
5.1 |
| Number of temperature control zones |
|
6 |
 |
Clamping system |
|
Double Toggle |
| Clamping force |
kN (tf) |
390 (40) |
Distance between tie-bars
(H x V) |
mm |
270X270 |
| Overall size of platens(H x V) |
mm |
415X415 |
| Open/close stroke |
mm |
160 |
| Mold Space Min-Max |
mm |
160-205 |
| Ejector type |
|
Pneumatic, center 1 point |
| Ejector force |
kN (tf) |
3.9 (0.4) |
| Cut punch type |
|
Motor Driven |
| Cut punch force |
kN (tf) |
7.8 (0.8) |
| Cut punch stroke |
mm |
6 |
| Locating ring hole diameter |
mm |
60 |
1266 Oakbrook Dr., Norcross, GA 30093 USA Copyright© 2007 All Rights Reserved
| Contact Info