Back to SGM Specifications Page
|
SGM Accumulator-Toggle Series - English Units | ||||||||
| SG50M | SG75M | SG100M | SG125M | SG180M | SG260M | SG350M | ||
|
|
Clamping |
55 | 83 | 110 | 138 | 198 | 286 | 385 |
|
Tie Bar |
12.20x12.20 | 14.17x14.17 | 16.14x16.14 | 18.11x18.11 | 20.08x20.08 | 22.05x22.05 | 27.95x27.95 | |
|
Overall |
17.91x17.91 | 20.87x20.87 | 24.02x24.02 | 26.38x26.38 | 29.53x29.53 | 33.07x33.07 | 40.55x40.55 | |
| Opening Stroke Min-Max (in) |
5.11-9.84 | 5.12-11.81 | 5.91-13.78 | 6.69-14.76 | 7.48-16.93 | 8.27-20.08 | 10.24-24.02 | |
| Mold Space Min-Max (in) |
6.3-13.78 | 6.29-16.14 | 7.09-16.14 | 7.09-17.72 | 7.87-19.69 | 9.06-22.83 | 11.81-25.59 | |
| Ejector Force Stroke (T / in) |
2.4/2.76 | 3.0/3.15 | 3.6/3.94 | 3.6/3.94 | 5.1/4.72 | 6.8/5.91 | 8.7/6.89 | |
| Dry Cycle (sec) |
1.1 | 1.2 | 1.3 | 1.4 | 1.5 | 1.8 | 2.3 | |
|
Plasticizing Unit |
C110S |
C160S | C250M | C360M | C450M | C900L | C1700L |
|
C160S |
C250M | C360M | C450M | C560M | C1250L | C2500L | ||
| Screw Diameter (in) |
0.87/0.98/1.10 | 0.98/1.10/1.26 | 1.10/1.26/1.42 | 1.26/1.42/1.57 | 1.42/1.57/1.77 | 1.77/1.97/2.20 | 2.48/2.80 | |
| 0.98/1.10/1.26 | 1.10/1.26/1.42 | 1.26/1.42/1.57 | 1.42/1.57/1.77 | 1.57/1.77/1.97 | 1.97/2.2/2.48 | 2.80/3.15 | ||
| Injection Weight (oz-PS) |
1.3/1.7/2.1 | 1.9/2.4/3.1 | 2.9/3.7/4.8 | 4.3/5.5/6.7 | 5.5/6.7/8.5 | 11.0/13.6/17.1 | 25.8/32.9 | |
| 1.9/2.4/3.1 | 2.9/3.7/4.8 | 4.3/5.5/6.7 | 5.5/6.7/8.5 | 6.7/8.5/10.5 | 15.0/18.8/23.8 | 38.4/48.8 | ||
| Injection Capacity ( in3 ) |
2.4/3.1/3.9 | 3.4/4.3/5.6 | 5.3/6.9/8.7 | 7.9/9.9/12.3 | 9.9/12.3/15.5 | 20.1/24.8/31.1 | 47.2/59.9 | |
| 3.4/4.3/5.6 | 5.3/6.9/8.7 | 7.9/9.9/12.3 | 9.9/12.3/15.5 | 12.3/15.5/19.2 | 27.3/34.3/43.4 | 69.5/88.3 | ||
| Injection Pressure (Max psi) |
39,820 30,860 24,600 |
39,820 31,710 24,320 |
41,950 32,140 25,310 |
39,670 31,280 25,450 |
37,680 30,430 24,030 |
39,820 32,280 25,740 |
31,280/24,600 | |
| 39,820 31,710 24,320 |
41,950 32,140 25,310 |
39,670 31,280 25,450 |
37,680 30,430 24,030 |
39,820 31,430 25,450 |
39,820 31,710 25,030 |
29,860/23,460 | ||
| Injection Rate (Max in3/sec) |
7.0/9.0/11.3 | 9.0/11.3/14.7 | 11.3/14.7/18.6 | 14.7/18.6/23.0 | 18.6/23.0/29.1 | 29.1/35.9/45.1 | 57.1/72.5 | |
| 9.0/11.3/14.7 | 11.3/14.7/18.6 | 14.7/18.6/23.0 | 18.6/23.0/29.1 | 23.0/29.1/35.9 | 35.9/45.1/57.1 | 72.5/92.0 | ||
| Plasticizing Capacity (Max lb/Hr) |
40/55/77 | 53/77/108 | 81/117/139 | 117/167/200 | 167/222/240 | 240/339/411 | 405/415 | |
| 40/57/79 | 81/117/139 | 117/167/200 | 167/222/194 | 224/299/330 | 275/378/526 | 363/488 | ||
|
1266 Oakbrook Dr., Norcross, GA 30093 USA Copyright© 2007 All Rights Reserved
|